User Manual
This quick start guide provides you
with basic instructions only. For
more complete instructions, refer
to your user’s manual provided in
the package, or download it at
www.telephones.att.com/manuals.
Caution: Use only the supplied rechargeable battery or replacement
battery (model BT183342/BT283342).
Caution: Use only the power adapter(s) provided with this product.
To obtain a replacement, visit our website at
www.telephones.att.com or call 1 (800) 222-3111. In
Canada, dial 1 (866) 288-4268.
Notes:
Plug one end of the telephone line cord into a telephone jack or a DSL
lter.
If you have DSL high-speed Internet service, a DSL lter (not included)
is required.
Telephone base
Install
Charger
Battery
Install the battery, as shown below. Charge your handset(s)
before initial use. The battery is fully charged aer 11 hours
of continuous charging.
Handset
CHARGE light On when the handset is charging in
the telephone base or charger.
PUSH TO TALK
Press to initiate a one-to-one or
one-to-group broadcast.
Press and hold to broadcast to a
group of system devices.
VOICE
Press to activate the
voice-controlled application of
connected cell phone.
Softkeys (2)
Press to select the menu item
displayed above the key.
While in a menu, press to select
an item, save an entry or setting,
cancel an operation, or back up to
the previous menu.
Telephone base
MIC
Microphone.
/ HANDSET
LOCATOR
While the phone is idle, press
to page all handsets.
MUTE
During a call, press to mute the
microphone.
While the telephone base is
ringing, press to silence the
ringer temporarily.
VOLUME
While in idle mode, press to
adjust the base ringer volume.
During message playback,
press to adjust the listening
volume.
VOICE
Press to activate the
voice-controlled application of
connected cell phone.
PTT/FLASH
Press to display the PTT menu
to begin a PTT call.
Press and hold to begin a one-
to-group broadcast when the
telephone base is not in use.
During a call, press to answer
an incoming home call when
you receive a call waiting alert.
Softkeys (2)
Press to select the menu item
displayed above the key.
While in a menu, press to
select an item, save an entry or
setting, cancel an operation, or
back up to the previous menu.
CANCEL
While in a menu, press to exit
without making changes or
press and hold to return to idle
mode.
Press and hold while the
telephone is not in use to erase
the missed call indicator.
REDIAL/PAUSE
Press repeatedly to view the
last ten numbers dialed.
While entering numbers, press
and hold to insert a dialing
pause.
DIRECTORY
Press to scroll up while in a
menu.
Press to show directory entries
when the telephone base is
not in use.
Part lists
THIS SIDE UP / CE CÔTÉ VERS LE HAUT
Battery Pack / Bloc-piles :
BT183342/BT283342 (2.4V 400mAh Ni-MH)
WARNING / AVERTISSEMENT :
DO NOT BURN OR PUNCTURE BATTERIES.
NE PAS INCINÉRER OU PERCER LES PILES.
Made in China / Fabriqué en chine CR1535
2 for CLP99287
3 for CLP99387
4 for CLP99457/
CLP99487
5 for CLP99547/
CLP99557/
CLP99587
CLP99287/CLP99387/CLP99457/
CLP99487/CLP99547/CLP99557/
CLP99587
DECT 6.0 cordless telephone/
answering system with
BLUETOOTH® wireless technology
User’s manual
1 for CLP99287
2 for CLP99387
3 for CLP99457/
CLP99487
4 for CLP99547/
CLP99557/
CLP99587
Handset
CELL 1/
CELL 2
Press to make or answer a cell call.
During a cell call, press to answer
an incoming CELL 1/2 call when you
hear a call waiting alert.
HOME/
FLASH
Press to make or answer a home
call.
During a call, press to answer an
incoming home call when you
receive a call waiting alert.
During a call, press to hang up.
While in a menu, press to cancel an
operation, back up to the previous
menu, or exit the menu display; or
press and hold this button to exit
to idle mode.
When the handset is ringing, press
to mute the ringer temporarily.
Press and hold while the telephone
is not in use to erase the missed
call indicator.
DIR
Press DIR to show directory entries
when the handset is not in use.
Press to scroll up or down while in
menus.
Press to increase or decrease the
listening volume when on a call.
While entering names or numbers,
press to move the cursor to the le
or right.
CID
Press CID to show caller ID log
when the handset is not in use.
1
Press and hold to set or dial your
voicemail number.
TONE /a>A
Press to switch to tone dialing
temporarily during a call if you
have pulse service.
While entering names, press to
change the next letter to upper or
lower case.
QUIET/#
Press and hold to enter the
QUIET mode setting screen, or to
deactivate QUIET mode.
Press to make or answer a home or
cell call using the speakerphone.
MUTE/DELETE
During a call, press to mute the
microphone.
While entering numbers or names,
press to delete a digit or character.
While reviewing caller ID log,
directory, redial memory, allow list,
block list, or star name list, press to
delete an individual entry.
REDIAL/PAUSE
Press repeatedly to view the last
ten numbers dialed.
While entering numbers, press and
hold to insert a dialing pause.
Telephone base
CALLER ID
Press to scroll down while in a
menu.
Press to show caller ID log
when the telephone base is
not in use.
USB port The standard size USB port in
the telephone base is used for
charging your cell phones.
/ ANSWER ON
Press to turn the built-in
answering system on or o.
X/DELETE
During a call, press to mute the
microphone.
While entering numbers or
names, press to delete a digit
or character.
Press to delete the message
currently playing.
Press twice to delete all
previously reviewed messages
when the telephone is not in
use.
/ REPEAT
During message playback,
press to repeat a message
or press twice to play the
previous message.
/ SKIP
During message playback,
press to skip a message.
/PLAY/STOP
Press to start or stop message
playback.
CELL 1/CELL 2
Press to make or answer a cell
call.
HOME
(Speakerphone)
Press to make or answer a
home call.
1
Press and hold to set or dial
your voicemail number.
TONE /a>A
Press to switch to tone dialing
temporarily during a call if you
have pulse service.
While entering names, press
to change the next letter to
upper or lower case.
QUIET/#
Press and hold to enter the
QUIET mode setting screen, or
to deactivate QUIET mode.
Basic initial settings
We recommend you program your telephone system
before use. The following are a few examples of common
features to set before using the telephone. Refer to the
Handset and telephone base settings and Answering
system settings in the Complete user’s manual for detailed
instructions on setting all telephone features.
Date and time
Note: Set the date/time before using the answering system.
Using a cordless handset or the telephone base:
1. MENU -> / -> Set date/time -> SELECT.
2. Enter the month (MM), day (DD) and year (YY) -> NEXT.
3. Enter the hour (HH) and minute (MM).
4. / -> AM or PM -> SAVE.
Basic answering system setup via
voice guide
You can follow the voice guide to record your own
announcement, set the number of rings and set the
message alert tone.
Using a cordless handset or the telephone base:
1. MENU -> / -> Answering sys -> SELECT.
THIS SIDE UP / CE CÔTÉ VERS LE HAUT
THIS SIDE UP / CE CÔTÉ VERS LE HAUT
CLP99287/CLP99387/
CLP99457/CLP99487/
CLP99547/CLP99557/
CLP99587
Quick start guide
The Bluetooth® word mark and logos are owned by Bluetooth SIG, Inc. and any use
of such marks by Advanced American Telephones and its parent, VTech Holdings
Limited, is under license. VTech Holdings Limited is a member of Bluetooth SIG, Inc.
Other trademarks and trade names are those of their respective owners.
Overview
2. / -> Voice guide -> SELECT.
3. Set up the answering system by inputting the designated
numbers, as instructed.
Add a Bluetooth
®
cell phone/headset
To use a Bluetooth enabled cellular phone or headset
with your telephone, you must rst pair and connect your
Bluetooth cellular phone or headset with the telephone
base.
Bluetooth wireless technology operates within a short range
(up to 30 feet). Keep the connected device within 15 feet of
the telephone base for optimal performance.
To pair and connect a cell phone using the telephone
base:
1. MENU -> / -> Bluetooth -> SELECT.
2. SELECT to select Add device.
3. SELECT to select Add cellular.
4. Disconnect the cell phone from any Bluetooth device ->
Press NEXT.
5. Place the cell phone next to the telephone base.
6. Press NEXT to turn on the telephone base discoverable
mode.
7. Turn on the Bluetooth feature of your cell phone and
search for or add new advices. Once your cell phone nds
your AT&T phone (AT&T DECT 6.0), press the appropriate
key on your cell phone to continue the pairing process.
Enter the cell phone passcode (typically 0000), if
required ->Press SET.
Enter the PIN (default PIN: 0000) of the telephone
base into your cell phone, if required.
To pair and connect a headset using the telephone base:
1. MENU -> / -> Bluetooth -> SELECT.
2. SELECT to select Add device.
3. / -> Add headset -> SELECT.
4. Disconnect your headset from any Bluetooth device ->
Press NEXT.
5. Set your headset to discoverable mode -> Press NEXT.
6. Press / to choose your headset, if required -> Press
SELECT.
Enter the PIN (typically 0000) of your headset, if
required -> Press NEXT.
Record your own announcement
Your outgoing announcement plays when calls are
answered by the answering system. You can use the preset
announcement to answer calls, or replace it with your own
recorded announcement.
Using a cordless handset or the telephone base:
1. MENU -> / -> Answering sys -> SELECT.
2. SELECT to select Announcement.
3. SELECT to select Record annc.
4. Speak towards the handset or the telephone base to
record your announcement and press STOP to end
recording and save it.
Number of rings
You can set the answering system to answer an incoming
call aer 2, 3, 4, 5, or 6 rings. You can also select toll saver. If
you choose toll saver, the answering system answers a call
aer two rings when you have new messages, or aer four
rings when there are no new messages. This enables you to
check for new messages and avoid paying unnecessary long
distance charges if you are calling from out of your local
area.
Using a cordless handset or the telephone base:
1. MENU -> / -> Answering sys -> SELECT.
2. / -> Ans sys setup -> SELECT.
3. / -> # of rings -> SELECT.
4. / to choose among 2, 3, 4, 5, 6, or Toll saver ->
SELECT.
Quick start guide
© 2017 Advanced American Telephones. All Rights Reserved.
AT&T and the AT&T logo are trademarks of AT&T Intellectual Property licensed to
Advanced American Telephones, San Antonio, TX 78219.
Printed in China. Issue 3.0 AT&T 07/17.
Part lists
Install
Overview
Basic initial settings
Operate
CLP99287/CLP99387/
CLP99457/CLP99487/
CLP99547/CLP99557/
CLP99587