Instruction manual

CHAPTER 7. SYSTEM BACKUP FOR DEFINITY G1 AND G3i
9. The screen displays:
save announcements
SPE B
SAVE ANNOUNCEMENT
Processor
Command Completion Status Error Code
SPE_B
Success
0
SPE_A
Success
0
Command successfully completely
enter command:
10.
11.
12.
13.
FIGURE 7-4. Save Announcements—SPE_B
Administration Note:
The active SPE’s completion status is always displayed first. During the save
announcement, as illustrated in the above screen, SPE_B is displayed as the active
SPE in the upper right corner of the screen.
Verify that a 0 is displayed for SPE_B and SPE_A in the Error Code column. A 0
indicates that the save announcement was a success
for each tape drive. If a
0 did not
appear for SPE_B and SPE_A, the save announcement
did not complete. Record the
“error code number” and the “error message” for the SPE that did not have a 0 and
notify maintenance support.
Remove the two backup cassette tapes from the tape drives and insert the original two
cassette tapes into the tape drives.
Label the two backup cassette tapes with the date and time they were updated. A special
notation may be put on the tapes to clearly distinguish them from other cassette tapes.
Store the two backup tapes in a secure place.
7-5