User`s guide

DEFINITY® ECS Release 5 8410 Voice Terminal User’s Guide 555-230-763 Issue 2

June 1997

Page 63

Important: You can use this feature only if the

Reset Spkr

label appears under the

button and if your voice terminal is set for the Speakerphone feature (as opposed

to the Speaker feature). If you

do not

have a Shift button or the

Reset Spkr

label on your

8410, you do not need to activate this feature.

If your 8410 is equipped with this feature, you can adjust the speakerphone to the

surrounding room acoustics to provide optimal performance. Use the Reset

Speakerphone feature in the following ways:

• Whenever you move your voice terminal to another place (even in the same room)

• Whenever the red light next to is fluttering

Note: You may also use this feature when you are on a call in the unlikely event

your speakerphone makes a squealing noise during the call. Your speakerphone

will adjust itself to normal for that call. (No tones will be heard.)

Important: If there has been an interruption in power (such as, the system has just

been powered up again, or you have plugged in the voice terminal at another

location), the light next to flutters until you reset the built-in speakerphone.

You can initiate the Reset Speakerphone feature when your handset is on-hook, or during

a call in which you are using the built-in speakerphone. (If a call is in progress, you will

not

hear the tones, and the new speakerphone adjustment is reset for

only

the duration of that

call.)

Reset Speakerphone

Speaker