Quick Start Guide 5.
Installation and setup After battery installation, place each handset in the telephone base or a charger and allow it to charge for sixteen hours before use. You can keep the battery packs charged by returning the handsets to the telephone base or chargers after each use. When the battery is fully depleted, a recharge takes about sixteen hours. The average talk time on a fully charged battery is about eight hours depending on environmental conditions, standby time is approximately four days.
Quick reference guide Cordless handset VCID SELECT MENU Press to scroll down while in menus. Press to display Caller ID information. While entering names or numbers, press to move the cursor to the left. Press to display menu, or to select highlighted item from menu or save an entry. ^DIR PHONE FLASH Press to scroll up while in menus. Press to display directory entries. While entering names, press to move the cursor to the right. Press to make or answer a call.
Quick reference guide Telephone base HANDSET LOCATOR/ INTERCOM Press to make handset(s) beep, initiate an intercom conversation, transfer or forward a call. REDIAL/PAUSE Press to activate the speakerphone to dial out the most recently called number. When the speakerphone is already on, press to dial out the most recently called number or press and hold to insert a 3second dialing pause. FLASH During a call, press to receive an incoming call if Call Waiting is activated.
