Operation Manual

22
Telephone operation
You can use the handset locator feature to find misplaced handsets.
To start the paging tone:
Press HANDSET LOCATOR on the telephone base to
start the paging tone on the handset for 60 seconds.
To stop the paging tone:
Press PHONE/FLASH, SPEAKER, or any dial pad key
(0-9, , or #) on the handset.
-OR-
Press HANDSET LOCATOR on the telephone base.
-OR-
Put the handset in the telephone base or charger.
NOTES:
If the handset is on a call or out of range, it does not beep
when paged.
If you press OFF/CLEAR or MUTE/DELETE on a handset, the ringer of
that handset is silenced but the paging tone continues on the other handset.
•
•
•
•
•
•
Handset locator