User Manual
Table Of Contents
- Getting started
- Technical specifications
- Limited warranty
- California Energy Commission battery charging testing instructions
- FCC Part 68 and ACTA
- FCC Part 68 and ACTA
- Especially about telephone answering systems
- ECO mode
- Pacemaker patients
- Precautions for users of implanted cardiac pacemakers
- Important safety information
- Maintenance
- Troubleshooting
- Handset display screen messages
- Screen icons, indicator lights and alert tones
- Deregistering handsets
- Remote access
- Message window displays
- Recording and playing memos
- Message playback
- Answering system overview
- Recording time
- Message alert tone
- Remote access code
- Number of rings
- Call screening
- Answer on/off
- Answering system settings
- Reasons for missing caller ID information
- Caller ID operation
- About caller ID
- Speed dial
- Dial, delete and edit a directory entry
- Search by name
- Review the directory
- Create directory entries
- Directory overview
- Call transfer using intercom
- Intercom
- Web address
- Handset locator
- Options while on calls
- Redial
- Making, answering and ending calls
- Telephone base ringer volume
- Handset settings
- Menu overview
- Wall-mount installation
- Battery charging
- Battery installation and charging
- Telephone base and charger installation
- Quick reference guide - handset
- Caller ID log
- Index
76
Appendix
Troubleshooting
Out of range or no pwr at base appears on my cordless handset.
Ensure that the telephone base is powered on.
Place the cordless handset in the telephone base for one minute to allow
the cordless handset and base to synchronize.
Move the cordless handset closer to the telephone base. You might have
moved out of range.
Reset the telephone base. Unplug the electrical power. Wait for
15 seconds, then plug it back in. Allow up to one minute for the
cordless handset and telephone base to reset.
Other electronic products such as HAM radios and other DECT phones,
can cause interference to your cordless telephone. Try installing your
telephone as far away as possible from these types of electronic devices.
The batteries do not hold a charge.
If the cordless handset is in the telephone base or charger and the charge
light does not come on, refer to the item The charge light is off on this page.
Charge the battery in the cordless handset for at least 16 hours. For
optimum daily performance, return the cordless handset to the telephone
base or charger when not in use.
If the battery is depleted, it may take approximately 30 minutes to charge
the handset before it shows LOW BATTERY. Refer to Battery charging on
page 9 for details.
You may need to purchase a new battery. Please refer to Battery
installation on page 7.
The charge light is off.
Make sure the power cord is plugged in correctly and securely.
Make sure the battery is installed correctly in the handset. Follow the
instruction in Battery installation on page 7 to install the battery.
Unplug the electrical power. Wait for 15 seconds, then plug it back in.
Allow up to one minute for the cordless handset and telephone base
to reset.
Clean the cordless handset and telephone base charging contacts each
month using a pencil eraser or cloth.
•
•
•
•
•
•
•
•
•
•
•
•
•