User`s guide

Overview and Testing
Verifying Fax Channel Extensions
✏ NOTE:
The analog ports assigned to fax channels must be administered on the
System 25 before running this test. See Chapter 3 for administration
procedures for these ports.
Test the fax channel extensions by placing all fax channels out of service. Test each
fax channel individually by placing it into service alone.
To verify the extensions assigned to fax channels, follow these steps:
1.
2.
3.
4.
5.
6.
7.
At the Voice System Administration menu, move the cursor to Application
Package Administration and press [ ENTER ↵↵ ].
The Application Package Administration menu appears.
At the Application Package Administration menu, move the cursor to AUDIX
Voice Power/FAX Attendant and Press [
ENTER ].
The AUDIX Voice Power/FAX Attendant menu appears.
At the AUDIX Voice Power/FAX Attendant menu, move the cursor to Fax
Equipment Operations and press [
ENTER ].
The Fax Equipment Operations menu appears.
At the Fax Equipment Operations menu, move the cursor to Fax Channel
Administration and press [
ENTER ].
The Fax Channel Administration window appears.
Press [
F8 ] (CHG-KEYS) to display the alternate key labels.
Press [
F2 ] (CHGSTATE)
The Change State of Fax Equipment form appears.
Place all fax channels out-of-service:
a.
In the New State field, enter m for manual out-of-service (MANOOS).
b.
In the Fax Equipment field, enter ca for card.
c.
In the Fax Equipment Number field, enter all.
d.
Leave the Change Immediately? field blank and press [ F3 ] (SAVE).
e.
Verify that all fax channels are now in the MANOOS state.
1-23