User`s guide
Overview and Testing
8.
9.
10.
11.
12.
Place
a.
b.
c.
d.
e.
one fax channel in-service for testing:
In the
New State
field, enter
i
for in-service (INSERV).
In the
Fax Equipment
field, enter
ch
for channel.
In the Fax Equipment Number field, enter the channel to be tested.
Leave the Change Immediately? field blank and press [
F3 ] (SAVE).
Verify that all fax channels are in the MANOOS state except for the
channel being tested. The channel being tested should be in the
INSERV state.
Dial any of the extensions assigned to Automated Attendant or Voice Mail
voice channels.
You should hear the default Voice Mail announcement.
Test the in-service fax channel:
a.
b.
c.
d.
e.
f.
Log into the Maintenance Mailbox using the password assigned earlier.
You should hear the Voice Mail Activity Menu.
Press [
8 ] to switch to Fax Mail service.
You should hear the Fax Mail Activity Menu.
Press [
1
] to send a fax message.
When prompted for a destination, enter [
9
], [
9
], [
9
], [
9
], [
#
] followed by
[
*
] , [
#
].
When prompted for immediate or economy delivery, press [ * ], [ # ].
When prompted to press [
START ] on your fax machine, listen to verify that
FAX Attendant issues a fax tone on the line.
If you do not hear the fax tone, verify that the port is connected and
administered correctly.
When you hear the fax tone, hang up the phone.
Place the tested channel back out-of-service:
a.
In the
New State
field, enter
m
for MANOOS.
b.
In the
Fax Equipment
field, enter
ca
for card.
c.
In the
Fax Equipment Number
field, enter
all.
d.
Leave the Change Immediately? field blank and press [ F3 ] (SAVE).
e.
Verify that all fax channels are in the MANOOS state.
Repeat steps 8 through 11 for each additional fax channel to be tested.
1-24