User`s guide

FAX Attendant Initial Implementation
Administering FAX Attendant
System Parameters
You must add the Message Waiting Lamp parameters to the third section of
FORM D and enter the parameters into the FAX Attendant System.
You need two pieces of information:
■
■
whether or not the message waiting lights are to be used
the System 25 message waiting lamp codes if they have been changed from
the default.
Message Waiting Lamp parameters affect only the operation of message waiting
lamps. The following parameters are available:
■
■
■
Code to Light specifies the internal code that FAX Attendant sends to the
switch to light the message waiting lamp. Enter #90.
Code to Extinguish specifies the internal code that FAX Attendant sends to
the switch to extinguish the message waiting lamp. Enter #91
Refresh indicates whether you wish to have message waiting lamps refreshed
at predetermined intervals. This parameter is usually set to n for “no” with
System 25.
2-14