User`s guide

System 25 Initial Implementation
FAX Attendant Checklist
Use the following checklist to verify that initial switch administration for FAX
Attendant is complete. Instructions for performing these tasks follow. Unless
otherwise noted, forms and instructions for these tasks are in the AT&T System 25
R3 Implementation Manual and Records Binder.
1.
2.
3.
4.
5.
6.
7.
Create Direct Group Calling (DGC) Groups and assign VMS and Fax
Response ports to the groups.
Complete all Fax Attendant administration for the Fax Response service.
(Instructions are provided in the AT&T FAX Attendant System™ Release 2.1.1
System Manager's Guide.)
Assign Call Coverage to the fax machines.
Administer private fax extensions by following the procedure in the System 25
Implementation Manual for “Adding a Station.” Also, assign Call Coverage to
private fax extensions. Private fax extensions are “phantom” stations where a
dial plan number is assigned but the physical extension does not exist.
Once the Master Controller and fax boards are operating, test the fax boards
by sending a fax message to a subscriber.
Place some test calls to ensure all FAX Attendant services work as intended.
Assign trunks to ring at DGC groups.
3-2