User`s guide

Dial
1 for signal strength indication. The
display area will show a number on a scale from
0 to 10, with 0 being the weakest and 10 the
strongest.
Dial
2 for voice quality indication. The
display area will show a number on a scale from
0 to 10, with 0 being the least effective voice
quality and 10 the best voice quality.
Dial
3 for the terminal identification
number. The display area will show a number
from 1 to 6. This is the number of the carrier
slot in which your radio module has been placed.
4 To exit the test mode, go on-hook
Transfer
To transfer a call to
another telephone
1 Press
Trans
Call appearance button for that call winks, and
present call is put on hold
Calling party cannot hear you
Second call appearance becomes active
2 Dial the number to which the call is to be transferred
[ringback tone]
Note: Remain on the line and announce the call if
desired; if there is no answer or the line is busy,
return to the held call by pressing its winking call
appearance button.
3 When the third party answers or when you hear the
other telephone ringing, press
Trans again
4 Hang up or press the (unlabeled) Drop button
15