User`s guide

MDW 9000 Compatibility

System 25:

■

For Releases 1, 2, and 3, this phone must be administered as

a 10-button MERLIN set (type 303).

Either a TN762B Hybrid pack or a ZTN79 ATL pack must be

used to connect the switch and the MDW 9000 telephone.

Assigning features may be done only by the system

administrator.

Use the following features with caution:

Automatic Intercom, Bridging, Coverage, Direct Station

Selection, Personal Line, Pooled Facility, Send All Calls

(use with single ring reminder).

Since these features provide visual indication that the

feature is on, be aware that if you turn off the handset when

using that feature, you may forget that the feature is on.

Do not assign the following features: Auto Answer, Scroll,

Inspect, Directory, Next, Local, Call, and Manual Callback

Queuing.

If programming the Flex DSS or Repertory Dial feature, dial

the number to be recorded and push the button you are

assigning to the feature. You will receive 3 short beeps and

a dial tone to confirm programming.

If you are programming numbers for the Station Speed Dial

feature, dial the numbers to be stored then dial the Per-

sonal Speed Dialing code (#20 through #39), including the

#. Listen for a confirmation tone followed by a dial tone.

System 25 buttons should be assigned as follows; 7, 8, 9,

10, and 11 are system access or feature buttons:

■

18 PMUTE

ON MSG

RANGE BATT