User`s guide

Troubleshooting
Symptom Possible Causes
Possible Solutions
After pressing ■ Handset is out of range
■ Move the handset closer
[ On/Off ], the handset
of its matching radio
to the radio module.
beeps and RANGE module.
shows in the hand-
set display.
■ An electrical device may
■ Remove interfering device
be interfering with your
or power it off, or move
communications link.
handset to another
location.
No ring on incoming
Handset is out of range of
Move the handset closer to
call,
RANGE appears its matching radio module. the radio module.
in handset display.
While talking and You are approaching an Move back towards the
walking, the handset
out of range condition.
handset’s matching radio
beeps and RANGE
module until the display
flashes in the hand- stops showing RANGE.
set display.
While talking and You are out of range of Move back towards the
walking, the handset
the radio module. YOUR
radio module. Press [ On/Off ],
beeps and RANGE CALL HAS NOT BEEN then proceed as you would
flashes in the hand-
DISCONNECTED. IT for any call placed on Hold.
set display. You keep
HAS BEEN PLACED ON
walking away from HOLD.
the handset’s match-
ing radio module, the
display goes blank,
and your call appears
to be disconnected.
After placing a call
You are out of range of the
Move back towards the
on Hold, you walk
radio module. YOUR radio module. Press
further away from
CALL HAS NOT BEEN
[ On/Off ], then proceed as
the handset’s match- DISCONNECTED. IT you would for any call
ing radio module.
IS STILL ON HOLD.
placed on Hold.
Your handset beeps,
the handset display
flashes RANGE, and
your call appears to
be disconnected.
7