User`s guide

NOTE: MERLIN II Attendant Planning Forms can be
ordered through the AT&T Customer Information
Center, 1-800-432-6600. Use this document
number when ordering: 999-504-139
ENTERING
Perform the following steps before you begin
PROGRAMMING
programming:
MODE
1
2
3
4
Connect a basic Touch-Tone telephone to an unused
port on the Basic Telephone (012) Module.
Dial the MERLIN II Attendant and wait for the tone.
Single beep sounds to indicate there are no announcements
recorded.
Dial the default authorized caller code: ❉ 789#
The two-beep confirmation tone sounds.
Continue programming the features in the following
order:
—
a Set the MERLIN II Attendant Clock
b Set the Business Days
c Set the Business Hours
d Reallocate Announcement Times
e Record Announcements
f Play Back Announcements
g Program Supervised Transfer Routes
h Program Blind Transfer Routes
i Change Call Processing Options
SETTING THE CLOCK
The clock in the MERLIN II Attendant must be
synchronized with the clock in the MERLIN II system
control unit to use the Night Service feature. If the
MERLIN II Attendant clock is not set, the Day
Announcement plays at all times.
2-2 Programming Features