Instruction manual

MERLIN LEGEND Communications System Release 5.0
Installation
555-650-140
Issue 1
June 1997
Connecting the Control Unit to the Network Interface
Page 4-10
Wiring
RJ11 and RJ14 Interfaces
RJ11 and RJ14 interfaces are connected to the control unit similarly. However,
note the following differences:
■ RJ11 connects one central office trunk per jack.
■ RJ14 connects two trunks per jack.
Plug a 267C-type adapter into each RJ14 jack. You need D2R cords for RJ11
jacks. See Figure 4-5
.
Figure 4-5. RJ11 and RJ14 Interfaces
Single-Line Adapter (RJ11)
2-Line Adapter (RJ14)
(267C)