Instruction manual

MERLIN LEGEND Communications System Release 5.0
Installation
555-650-140
Issue 1
June 1997
Initializing and Testing the System
Page 7-2
Initializing the System
Programming Guides
The following guides are available to assist you:
■ Programming Summary for quick-reference procedures (document
number 555-630-111)
■ System Programming for detailed procedures (document number
555-630-140, in the binder accompanying this one)
■ System Programming and Maintenance (SPM) for detailed SPM
procedures (document number 555-630-140, in the binder
accompanying this one)
Restoring from the Translation Memory Card
If you received the Release 5.0 Translation memory card, follow the steps
below to initialize the system:
Perform a System Erase (frigid start).
See
Maintenance and Troubleshooting for detailed instructions.
Console Procedure:Menu→
Maintenance→Slot→Dial or Type
00→Enter→Demand Test→System Erase (Line 5, left button)
twice→
Yes
Use the programming console and the translation memory card to
perform the Restore procedure.
See Appendix D of
Maintenance and Troubleshooting for instructions.
Restoring from the System
Programming Disk
If you received the Release 5.0 system programming disk, follow the steps
below to initialize the system:
Perform a System Erase (frigid start).
See
Maintenance and Troubleshooting for detailed instructions.
Console Procedure:Menu→
Maintenance→Slot→Dial or Type
00→Enter→Demand Test→System Erase (Line 5, left button)
twice→
Yes