Instruction manual

MERLIN LEGEND Communications System Release 5.0
Installation
555-650-140
Issue 1
June 1997
Installing the Control Unit
Page 2-23
Installing the Power Supply
Figure 2-6. Installing a Copper Shield in the Power Supply
Tuck the foil shield tightly along the ledge (or crease) of the
housing and work out any air bubbles as you press the foil firmly in
place.
With the copper-foil shield in place, put the power unit information
label on the lower piece of foil.
Attach the UL or CSA label on the power supply below the
copper-foil shield.
Upper Copper
Foil Shield
Lower Copper
Foil Shield
Power Unit 
Information
Label
UL Label
or
CSA Label
CAUTION
TURN OFF
POWER BEFORE
INSERTING OR
REMOVING
MODULES