Instruction manual

MERLIN LEGEND Communications System Release 5.0
Maintenance and Troubleshooting
555-650-140
Issue 1
June 1997
Control Unit Problems
Page 4-17
Processor Problems
Console Display/Instructions Additional Information PC
Follow the instructions from your technical support organization to
modify the contents of the address entered in Step 6.
System Erase (Frigid Start)
!
CAUTION:
Do not perform a System Erase unless you are installing a
replacement processor or following instructions from your technical
support organization. This procedure erases all system
programming from the processor and resets the system to factory
defaults.
Summary
To perform a System Erase (Frigid Start), follow the steps below.
Oxaaaaaaaaa Enter data:
aa
Enter
Backspace Exit
AB
CD
EF
Console Procedure Menu→Maintenance→Slot→→Dial 00 →Enter→Demand
Test→System Erase (Line 5, left button) →System Erase
(Line 5, left button)→
Yes
PC Procedure → →Type 00 → → → →
Preparation Time Approximately 1 minute