Instruction manual

MERLIN LEGEND Communications System Release 5.0
Maintenance and Troubleshooting
555-650-140
Issue 1
June 1997
Control Unit Problems
Page 4-43
Module Problems
The screen below appears when the module is successfully busied-out.
Console Display/Instructions Additional Information PC
The screen below appears when the busy-out fails. Try again, and be sure to
specify the correct slot.
Reset
Summary
To reset the module, follow the steps below.
Busy-Out Slot xx :
xx = slot number entered in Step 2
Busy-Out Complete
Exit
Busy-Out Slot
xx :
xx = slot number entered in Step 2
Busy-Out FAILED
Exit
Console Procedure Menu→Maintenance→Slot→Dial the slot
no.→
Enter→Reset→Yes.
PC Procedure
→ →Type the slot no.→ → →
Appropriate Modules Any module that you are about to test
Time Estimate Less than 1 second (all calls in progress are
terminated or put on hold immediately). If you do
not want to interrupt calls in progress, use Busy-Out
instead of Reset, as described above.