Instruction manual

MERLIN LEGEND Communications System Release 5.0
Maintenance and Troubleshooting
555-650-140
Issue 1
June 1997
Control Unit Problems
Page 4-46
Module Problems
The screen below appears when the Reset fails. Try again, and be sure to
specify the correct slot.
Restore
Once you complete module testing, restore it to terminate the Busy-Out or
Reset condition.
Summary
To reset the module, follow the steps below.
Console Display/Instructions Additional Information PC
From the Maintenance menu, select the Slot option.
Reset Slot xx :
xx = slot number entered in Step 2
Reset FAILED
Exit
Console Procedure Menu→Maintenance→Slot→Dial the slot no.→
Enter→Restore→Yes.
PC Procedure
→ →Type the slot no.→ → →
Appropriate Modules Any module after testing it
Time Estimate Less than 1 second.
Maintenance
Make a selection
System
Slot
Port
Exit