Instruction manual

MERLIN LEGEND Communications System Release 5.0
Maintenance and Troubleshooting
555-650-140
Issue 1
June 1997
Control Unit Problems
Page 4-57
Module Problems
Console Display/Instructions Additional Information PC
Select the Board Controller Test.
Select Test Once or Repetitive.
The screen below appears while the test is running. At the same time, if the
module has a green LED, it flashes.
The screen below appears only if you selected Test Once and the module
passes the test.
Demand Test Slot xx :
xx = slot number entered in Step 2
Make a selection
Note:Busy out slot first
BoardCntrlr
IntLoopback
Exit
Demand Test Slot xx :
xx = slot number entered in Step 2.
Board aaaaaaaaaaaaaaaaaa
Board Controller:
Test Once
Repetitive
Select Test Once or
Exit
Repetitive
Demand Test Slot xx :
xx = slot number entered in Step 2
Board aaaaaaaaaaaaaaaaaa
Board ControllerTest
in Progress
If you are running the repetitive test,
the screen remains until the test fails.
To interrupt repetitive testing, select
Exit
Exit.
Demand Test Slot xx :
xx = slot number entered in Step 2
Board aaaaaaaaaaaaaaaaaa
Board Controller Test
Successfully Completed
Exit