Instruction manual

MERLIN LEGEND Communications System Release 5.0
Maintenance and Troubleshooting
555-650-140
Issue 1
June 1997
Control Unit Problems
Page 4-73
Module Problems
If a Board Renumber is also required, the screen below appears.
Console Display/Instructions Additional Information PC
Perform a
Board Renumber and/or Restore as indicated above.
Error Conditions During Firmware Upgrade
The following error conditions can occur during a firmware upgrade. Recovery
procedures follow each error condition.
Memory Card In Use By Another Feature
Select Exit and begin the upgrade procedure again.
Upgrade Slot xx :
Upgrade Successfully
Completed
Slot Busied Out.
Board Renumber needed.
Exit
Module Upgrade:
Memory Card in use by
another feature
Exit