Instruction manual

MERLIN LEGEND Communications System Release 5.0
Maintenance and Troubleshooting
555-650-140
Issue 1
June 1997
Control Unit Problems
Page 4-74
Module Problems
Missing Card or Card Not Inserted Correctly
Insert the memory card correctly; then select Exit and begin the upgrade
procedure again.
Console Display/Instructions Additional Information PC
Memory Card Is Corrupted
Select Exit and repeat the upgrade procedure with a new memory card.
Module Cannot Be Upgraded
Module Upgrade:
verify that Memory Card
has been inserted
correctly.
Exit
Module Upgrade:
Information on the
Memory Card is corrupted.
Please remove the
Memory Card.
Exit
Upgrade Slot xx :
xx = slot selected in Step 3.
Module can not be
upgraded.
Exit