Instruction manual

MERLIN LEGEND Communications System Release 5.0
Maintenance and Troubleshooting
555-650-140
Issue 1
June 1997
Control Unit Problems
Page 4-84
800 NI-BRI Module Problems
The communication paths’ result codes are ordered as follows on lines 3
through 6:
Communication paths correspond to the following ports on the 800 NI-BRI
module:
Beginning with Release 4.1, the following screen appears when the testing for
all 16 communication paths is completed. On a module with fewer than 16
administered paths, the screen shows “OKNOH” or “OKH” described in Table
4-7 for all successful paths; error codes for all failed paths; and “SPID” for any
path that was not administered. Before proceeding, record all the result codes
on this screen, in the correct order.
Provisioning slot xx :
xx = slot number entered in Step 2
At least 1 line not OK
xxxxx xxxxx xxxxx xxxxx
Lines 3 through 6 will contain at
xxxxx xxxxx xxxxx xxxxx
least one error message.
xxxxx xxxxx xxxxx xxxxx
See Table 4-7.
xxxxx xxxxx xxxxx xxxxx
Exit
123 4
567 8
9101112
13 14 15 16
PATHS PORT PATHS PORT
1, 2 1 3, 4 2
5, 6 3 7, 8 4
9, 10 5 11, 12 6
13, 14 7 15, 16 8
Provisioning slot xx :
xx = slot number entered in Step 2
xxxxx xxxxx xxxxx xxxxx
Lines 3 through 6 will contain the
xxxxx xxxxx xxxxx xxxxx
test result codes.
xxxxx xxxxx xxxxx xxxxx
See Table 4-7.
xxxxx xxxxx xxxxx xxxxx
Exit