Instruction manual

MERLIN LEGEND Communications System Release 5.0
Maintenance and Troubleshooting
555-650-140
Issue 1
June 1997
Control Unit Problems
Page 4-95
800 NI-BRI Module Problems
Table 4-7 Continued
Continued on next page
Result
Code
Description Corrective Action
OKNOH
(Release
4.1 and
later. See
OK for
Release
4.0 and
earlier)
BRI facility that is
not part of an
MLHG is
provisioned with
functioning voice
and data
capabilities
No action is required if non-MLH voice and data
functionalities are expected. If MLH is expected, verify
that the MLHG DN is not present and, if so, administer
it and rerun the test.
SPID
(Release
4.1 and
later)
No or incorrect
SPID
administration
Check that the facility is administered with the SPID
provided by the LEC and rerun the test. If the error
persists, contact the LEC.
LG MERLIN
LEGEND BRI
error on that
facility
This result should never appear; if it does, contact the
NSAC.
ADMCO
(Release
4.0 and
earlier)
MERLIN
LEGEND
administration
error and/or CO
provisioning error
on that facility
Check that the facility is administered with the DN
provided by the CO. If the DN was not administered
properly, correct it and rerun the test. If the error
persists, perform the appropriate set of tests (voice only,
data only, or voice and data) and record the results
before contacting the LEC:
■ Outgoing Voice Call Test
■ Incoming Voice Call Test
and/or
■ Outgoing Data Call Test
■ Incoming Data Call Test
The possible causes for this error are:
■ Incorrect DN
(Error identified at Incoming Voice/Data Call Test,
Step 2)
Incoming calls fail.
■ Any of the causes listed for CO-V and CO-D