Instruction manual

MERLIN LEGEND Communications System Release 5.0
Maintenance and Troubleshooting
555-650-140
Issue 1
June 1997
Control Unit Problems
Page 4-130
Removing a CTI Link
Select Hiding Time.
Hiding Time is
not shown on the display, but may be selected by
pressing the associated softkey twice.
Console Display/Instructions Additional Information PC
The following screen appears.
If you choose Exit from this screen, you have not entered any data and you
will return to the screen shown in Step 4.
If you choose Enter from this screen, you have entered data and you will
return to the screen shown in Step 4.
Removing a CTI Link
Two procedures are used for CTI link removal. They are:
■ Permanent Removal. When you want to permanently remove a CTI link
from the MERLIN LEGEND Communications System.
CTI Link xxxx :
xxxx is dial plan
Make a selection
number, slot/port, or
Status Test
logical ID.
Restart
Hiding Time
Exit
CTI Link xxxx :
xxxx is dial plan number,
Enter seconds for hiding
slot/port, or logical ID.
a broken link (0-90)
xx is number of seconds (0–90).
xx
default is 25 seconds. If you
enter 1 through 9, the value
is changed to a 10.
Exit Enter