Instruction manual

MERLIN LEGEND Communications System Release 5.0
Maintenance and Troubleshooting
555-650-140
Issue 1
June 1997
Introduction
Page 1-8
Remote Programming Maintenance
Setting Up Equipment for Remote
Maintenance
To set up equipment for remote maintenance, follow the steps below while
referring to Figure 1-3
and to Installation.
Connect the PC and modem.
■ If you have an external modem, use an EIA-232-D cable.
■ If you have an internal modem, the connection is already
established.
Use a D8W cord to connect the modem to a T/R trunk jack.
Use a D8W cord to connect the modem to a T/R telephone.