Instruction manual

MERLIN LEGEND Communications System Release 5.0
Maintenance and Troubleshooting
555-650-140
Issue 1
June 1997
Central Office Problems
Page 5-30
Checking Ports
Resetting an RS-232 Port
The ADMIN (SPM) port is RS-232 Port 1, and the SMDR port is RS-232 Port 2.
Summary
Console Procedure Menu→Maintenance→Port→RS232 Port1 or RS232
Port2
→Dial the dial plan no.→Enter→Reset→Yes
PC Procedure → → or →Type the dial plan
no.→
→ →
To reset an RS-232 port, follow the steps below.
Console Display/Instructions Additional Information PC
From the Maintenance menu, select the Port option.
Specify the RS-232 port.
Specify the dial plan extension number ( sspp = 2-digit slot number
and 2-digit port number).
Maintenance
Make a selection
System
Slot
Port
Exit
Port:
Make a selection
Line/Trunk Modem
Station B-Channel
RS232 Port1 DSL
RS232 Port2
Select RS232 Port 1 or
Exit Enter
RS232 Port 2.
RS232 Port x :
x = port selected in Step 2
Make a selection
Reset
Exit