Instruction manual

MERLIN LEGEND Communications System Release 5.0
Maintenance and Troubleshooting
555-650-140
Issue 1
June 1997
Central Office Problems
Page 5-38
Checking Ports
This indicates that the problem may be at the CO end. First, make sure the
correct B-channel is selected. If the correct B-channel is selected, the customer
or Lucent Technologies representative acting as the customer’s agent should
ask the CO to clear the problem from that end. If the problem is not at the CO
end, select the correct B-channel and repeat the Audit Lines procedure.
Auditing Calls
Summary
Console Display/Instructions Additional Information PC
From the Maintenance menu, select the Port option.
Console Procedure Menu→
Maintenance→Port→B-Channel→Di
al the slot and port no.→
Enter→Audit Call
PC Procedure → → →Type the slot and port
no.→
→
Appropriate Slot or Port This test can be run only on the slot and port of
a DS1 PRI B-channel.
Time Estimate Four minutes
Backup Procedure Not required
Busy-Out or Reset Not required
Interrupting the Test You cannot interrupt this test.
Restore Not required
Maintenance
Make a selection
System
Slot
Port
Exit