Instruction manual

MERLIN LEGEND Communications System Release 5.0
Maintenance and Troubleshooting
555-650-140
Issue 1
June 1997
Central Office Problems
Page 5-46
Conclusion of Hardware Maintenance
Figure 5-4. Installing the Control Unit Housing (Release 2.0 and Earlier)
Line up the wire clips attached to the carrier with the recesses on
the outside of the side panels. See Figure 5-4
.
If the wire clips are not attached to the control unit, see “Installing the
Housing Clips” in Chapter 2 of
Installation .
Push the panels back until the clips hook over the tabs and rest in
the recesses.
Slide housing cover
forward into clips