Instruction manual

MERLIN LEGEND Communications System Release 5.0
Maintenance and Troubleshooting
555-650-140
Issue 1
June 1997
Introduction
Page 1-10
Using SPM
If you do not have a hard drive, insert the SPM diskette into Drive A
and switch to Drive A if it is not already the current drive.
Start the SPM program.
Type
SPM . The SPM Welcome screen appears, as shown below.
Console Display/Instructions Additional Information PC
Press any key.
Select an option by pressing one of the function keys.
With a Local or Remote Modem Connection
When the equipment is set up, you can perform remote maintenance by dialing
the remote processor’s built-in 2400/1200-bps modem. You can dial the modem
directly or call the system operator and request to be transferred to the modem.
Both procedures are explained below.
Dialing the System Operator
If you do not know the remote access trunk number, dial the number for the
customer’s system. To dial the operator, follow the steps below.
Start SPM. When the Welcome message appears, press any key.
Welcome to SPM
If the main menu (see Step 4) does
The MERLIN LEGEND
not appear, or if the information on
System Programming
the screen is garbled, press any
& Maintenance Utility
key again.
Please press any key
to continue:
Version X.xx
SPM Main Menu
Menu: Select Function
Sys Pro-
gram
Mainte-
nance
Backup Restore
Boards Pass-Thru
Print Opts Password
Monitor Language