Instruction manual

MERLIN LEGEND Communications System Release 5.0
Maintenance and Troubleshooting
555-650-140
Issue 1
June 1997
Introduction
Page 1-16
Using SPM
Table 1-1 Continued
PC Key Console SPM Function
n/a Help. Display a help screen about SPM operations. To
exit from Help, press
.
n/a Reset. Reset the communications port. For example,
if the information on the screen is garbled, try exiting
from and then re-entering the screen. If the screen
remains garbled, use
+ to clear the screen
and return to the SPM Welcome screen. Note that
using
+ drops the modem connection.
n/a Browse. View print reports saved with Print Opts.
n/a Escape to shell. To use this key in sequence, you
must set DEBUG=1 in the SPM configuration file
ams.cfg. You can then use this key sequence to
execute DOS (or UNIX system) commands. To return
to SPM, type
exit .
Enter This key on your PC can be used instead of
(Enter) when Enter appears as a choice in the
7-by-24 console simulation window.
Backspace can be used instead of when it appears as
a choice in the 7-by-24 console simulation window.
Delete The key on your PC can be used instead of
(Delete) when it appears as a choice in the 7-by-24
console simulation window.
n/a The up, down, left, and right arrow keys can be used
to highlight selections in a menu and to select the 20
line buttons below the 7-by-24 console simulation
window.