Instruction manual

MERLIN LEGEND Communications System Release 5.0
Maintenance and Troubleshooting
555-650-140
Issue 1
June 1997
Backing Up with a Memory Card
Page D-25
Restore
Card Removed after Confirmation
The memory card was removed from the processor slot while the restore was in
progress. The restore is aborted and the system performs a System Erase (frigid
start). You must reinsert the memory card and repeat the restore procedure.
Wrong System Programming Port
Console Display/Instructions Additional Information PC
The system programming port is not set to the same system programming port as
that set in the backup file. The restore is aborted. Use the Inspect feature to view
the port of the file on the card. Change the system programming port to match the
port shown on the card (see “System Programming Position Assignment” in
System Programming, or System Programming Summary) and repeat the restore
procedure.
Memory Card Restore:
RESTORE IS CANCELED.
System is DOWN.
Restore
n :
n = filename selected
Change Sys Programming
xxxx = system programming port
Port to Extension xxxx
extension
before Restoring.
Exit