Instruction manual

MERLIN LEGEND Communications System Release 5.0
Maintenance and Troubleshooting
555-650-140
Issue 1
June 1997
Backing Up with a Memory Card
Page D-27
Restore
If the restore fails because the card is damaged, the system performs a System
Erase (frigid start). Repeat the restore procedure using a different file and/or
memory card.
Wrong Type of Card
The inserted card does not match the card option selected from the System menu.
Remove the card and repeat the restore procedure with the correct type of card.
See ‘‘Card Types’’
for information about the card labels.
Board Mismatch
Console Display/Instructions Additional Information PC
A mismatch exists between the hardware components present on the current
system and the hardware components reflected in the backup file. The restore is
aborted. You can do one of the following:
■ Repeat the restore procedure with another file.
■ Modify the system hardware to match the configuration of the backup file
and repeat the restore procedure with the same file.
Memory Card Restore:
Inserted Memory Card is
not the correct type.
Remove and insert MERLIN
LEGEND Backup/Restore
Card.
Exit
Restore
x :
x = filename selected
Restore Failure
RESTORE IS CANCELED.
Board mismatch between
control unit and file.
Exit