Instruction manual

Modifying A Release 2.1 or Earlier Processor Key Mode
Page E-1
MERLIN LEGEND Communications System Release 5.0
Maintenance and Troubleshooting
Issue 1
June 1997
MERLIN LEGEND Communications System Release 5.0
Maintenance and Troubleshooting
555-650-140
Issue 1
June 1997
E
E
Modifying A Release 2.1 or Earlier
Processor Key Mode
Release 2.1 and Earlier
!
CAUTION:
This procedure must be performed for KF registration with the FCC.
This procedure prevents the system from being programmed as a
Hybrid-PBX system. Do this only if the system is programmed for Key
mode and GS trunks are not indicated on Form 2c, System Numbering:
Line/Trunk Jacks.
To modify the processor for Permenant Key mode, follow the steps below. Refer to
Figure E-1
.
Remove the processor from its packaging.
Place the processor on a flat surface.
If the feature module is installed, remove it.
See ‘‘Replacing the Feature Module’’
in Chapter 4 for instructions.