Instruction manual

MERLIN LEGEND Communications System Release 5.0
Maintenance and Troubleshooting
555-650-140
Issue 1
June 1997
Introduction
Page 1-25
Maintenance Strategy
Frigid Start (System Erase)
!
CAUTION:
All system programming is erased. When you perform a frigid start
(System Erase), all calls are dropped, and the system configuration
information is erased. All system memory must be reinitialized,
including system programming. Then the entire system must be
rebooted.
To perform a frigid start, select System Erase as follows:
Console Procedure Menu
→Maintenance→Slot→Dial 00 →Demand
Test→System Erase
(Line 5 of the display, left
button)→
System Erase→Yes
PC Procedure → →Type 00 → → → →
Considerations
■ System Erase is not displayed on the MLX-20L status display. To select
System Erase, press the left button on Line 5 of the display twice.
■ After a System Erase, the default printer is the PC printer, not the Station
Message Detail Recording (SMDR) printer. If you want on-site printouts
from the SMDR printer, make sure you change the option.
■ To change the printer option, see System Programming and
Maintenance (SPM)
for information on the Print Opts option on the SPM
Main Menu.
For more information on System Erase, see ‘‘
Processor Problems’’ in
Chapter 4
.