Instruction manual

MERLIN LEGEND Communications System Release 5.0
Maintenance and Troubleshooting
555-650-140
Issue 1
June 1997
Error Logs, Access Logs, and System Inventory
Page 2-4
Error Logs
The most recent alarm message stays on the System Error Log screen until it is
replaced by another. The screen does not update the most recent alarm while
displayed; to see any updates, you need to exit this screen and re-enter.
Checking Permanent Errors
Follow Steps 1 through 3 above for “Checking the Error Logs.” In Step 3, select
Permanent.
Console Display/InstructionsAdditional Information PC.
Line 2 provides a brief description of the error code identified on Line 6. For
more information on an error code, see Table 2-2.
Line 3 indicates the slot and port where the error was detected.
Line 5 indicates the error’s last occurrence.
NOTE:
Depending on which entry you delete, you might clear an alarm. See
‘‘
Alarms’’ in Chapter 1 for additional information about alarms.
Checking Transient Errors
Follow Steps 1 through 3 above for “Checking the Error Logs.” In Step 3, select
Transient.
Console Display/InstructionsAdditional Information PC.
Permanent Errors: >
xxxxxxxxxxxxxxxxxxxxxx
Slot xx Portxx Count xxx
Press the More button to page
First mm/dd/yy hh:mm
through the permanent errors.
Last mm/dd/yy hh:mm
Code xxxx
Press the Drop button to delete
Exit
an error log entry.
Transient Errors: >
xxxxxxxxxxxxxxxxxxxxxx
Slot xx Port xx Count xxx
Press the More button to page
First mm/dd/yy hh:mm
through the transient errors.
Last mm/dd/yy hh:mm
Code xxxx
Press the Drop button to delete
Exit
an error log entry.