Instruction manual

MERLIN LEGEND Communications System Release 5.0
Maintenance and Troubleshooting
555-650-140
Issue 1
June 1997
Error Logs, Access Logs, and System Inventory
Page 2-19
Error Logs
Table 2-2 Continued
Continued on next page
Error
Codes Description Action
8404 ON HOOK BEFORE WINK:
Outbound dialing problems on tie
trunks. For a tie trunk with delay dial
or wink start, the far end of the
network interface went on-hook
before the handshake was
completed.
If problem persists, troubleshoot the tie
trunk configuration. Troubleshoot the far
end to see if it is working and translated
properly. Troubleshoot for faulty cable.
Replace the module.
8405 ON HOOK BEFORE READY:
Outbound dialing problems on tie
trunks. For a tie trunk with delay dial
or wink start, the far end of the
network interface went on-hook
before the guard time elapsed.
Troubleshoot the far end of the network
interface to see if it is working and
translated properly. Troubleshoot for
wink start and faulty cable. Troubleshoot
the far end of the network. Replace the
module.
8406 INTERDIGIT TOO SHORT:
Inbound dialing problems on tie and
DID trunks.
Troubleshoot the far end of the network
interface to see if it is working and
translated properly. Troubleshoot for
faulty cable. Replace the module.
8407 BAD UPDATE:
Communication problems occurred
between the processor and the
modules. Module may need to be
replaced.
Turn the processor off and then on.
Repeat system programming procedure.
If problem persists, escalate to your
technical support organization.
8408 ROTARY RATE > 12PPS:
Inbound dialing problems on tie and
DID trunks.
Troubleshoot the far end of the network
interface to see if it is working and
translated properly. Troubleshoot for
faulty cable. Replace the module.
8409 ROTARY RATE < 8PPS:
Inbound dialing problems on tie and
DID trunks.
Troubleshoot the far end of the network
interface to see if it is working and
translated properly. Troubleshoot for
faulty cable. Replace the module.