Instruction manual

Installing the PC, CAT, or Printer
CAUTION:
To prevent damage from electrostatic discharge (ESD), avoid
touching leads, connectors, pins, and other components. Use a
properly grounded wrist strap.
Connecting a CAT and Printer on the Same
AC Outlet
If the printer is an AT&T CAT serial printer and is plugged into the same AC
outlet as the control unit and CAT, and the CAT is less than 14 ft (4.27 m) and
the printer is less than 50 ft ( 15 m) from the control unit, use the hardware and
procedures in this section.
Hardware
■ Z200A EMI filter
■ D8W cord
■ 355A Adapter
Connecting a Printer to the Control Unit
5-9