Instruction manual

New Programming Options
4-21
100R INA and 100 DCD Modules
Inverting the Clock 4
The factory setting for inverting the clock is No. Invert the clock by using the
following sequence:
Console Procedure SysProg
→Start→Lines and Trunks→
More→ More→CSU/DSU→Type Slot no.→
Enter→ Data Port→Type por t
no.
→Enter→Invert Clk→Select Transmit
or Receive
→Select Yes or No→Enter
PC Procedure
→→→More→More→→Type Slot
no.
→1→→Type port no.→1%
→→
Select Transmit or Receive→Select
Yes or No
→ 1
Inverting Data 4
The factory setting for inverting data is No. Invert data by using the following
sequence:
Console Procedure SysProg
→Start→Lines and Trunks→
More→ More→CSU/DSU→Type Slot no.→
Enter→ Data Port→Type por t
no.
→Enter→Invert Data→Select Transmit
or Receive
→Select Yes or No→Enter
PC Procedure
→→→More→More→→Type Slot
no.
→1→ →Type port no.→1→
→
Select Transmit or Receive→Select Yes
or No
→ 1