Instruction manual

Reassigning Business Cordless 905 Line Buttons
5-21
Reassigning Buttons on the TransTalk and Business Cordless 905 Telephones
d. Change lines being assigned to lines 61–66 by selecting Lines 61–80
on the console, or PC (
).
e. Select each line button (61–66 or
8+ –8+ ) to
remove the virtual placeholder assignments and turn off the green (G)
LED.
6. Verify that button assignments are correct:
a. Print an Extension Report and verify that the lines assigned to the
buttons on the BC 905 telephone match the following:
b. If the line programming matches the report above, move on to Step 7. If
the programming does not match the report above, verify which lines
were removed and repeat from above as appropriate.
7. Using Centralized Telephone programming, assign features to meet the
customer’s needs. For example, set ringing options for outside lines and
ICOM lines, and assign Automatic Line selection preference.
A EXTENSION INFORMATION
A
Button 18 *21 Blank Status None
A
Button 17 *21 Blank Status None
A
Button 16 *21 Blank Status None
A
Button 15 *21 Blank Status None
A
Button 14 *21 Blank Status None
A
Button 13 *21 Blank Status None
A
Button 12 *21 Blank Status None
A
Button 11 Line 803 -N Status None
A
Button 10 *21 Blank Status None
A
Button 9 *21 Blank Status None
A
Button 8 *21 Blank Status None
A
Button 7 Line 802 -I Status None
A
Button 6 *16 Ext Voice -I Status None
A
Button 5 *21 Blank Status None
A
Button 4 *21 Blank Status None
A
Button 3 *21 Blank Status None
A
Button 2 Line Blank Status None
A
Button 1 *16 Ext Ring -I Status None