Instruction manual

Basic System Management Procedures
8-49
System Programming Maintenance
5. Assign or remove the module from the slot entered in the previous Step.
■ To remove the module type from the specified slot number, click 
(Delete). The Boards menu reappears.
■ To assign the module type to the specified slot number and assign that
same module type to another slot, click
 (Next).
■ To assign the module type to the specified slot number and assign a
different module type to another slot, click
 (Enter).
■ To terminate the procedure and assign a different module, click 
(Back) and repeat Steps 2 through 4.
■ To view types of modules assigned to all slots, click  (Inspect).
6. To save your entry, click
 (Back).
The programming session terminates and the system restarts.
module name
module name = option selected in Step 2
Enter slot numbers
(01–17)
nn = slot entered in Step 5 (second digit
will not display.
nn
Delete
Backspace Next
Back Enter