ZTE AT T Velocity 2 User Guide English

3. On the wireless device you wish to connect, press the

WPS button.

4. On the Velocity 2 touch screen, tap OK.

Your mobile hotspot and the wireless device will communicate and

establish the connection.

Note: You can also initiate a WPS connection from the Velocity 2

touch screen without pressing the button. From the home screen,

tap Wi-Fi Main Wi-Fi Network or Guest Wi-Fi Network WPS

Pair with Main Wi-Fi or Pair with Guest Wi-Fi.

From the AT&T Wi-Fi Manager:

1. On a connected device, log in to the AT&T Wi-Fi Manager.

(See AT&T Wi-Fi Manager on page 8.)

2. Click Settings in the navigation menu.

3. Click Wi-Fi Basic.

4. Under either Main Wi-Fi Network or (if Guest Wi-Fi is enabled)

Guest Wi-Fi SSID, locate the WPS Mode section.

5. Choose a WPS connection method:

• If the wireless device you want to connect has a WPS button,

click WPS Push Button, and then within 2 minutes, press the

wireless device's WPS button.

• If the device you want to connect has a WPS PIN associated

with it, click the PIN eld and enter the device's PIN. Click

Enter WPS PIN. Your mobile hotspot and the wireless device

will communicate and establish the connection.

GET STARTED