Installation guide

Chart 2. General Zone / Group Configurations
Feature
Mode Option/
Verify
Dial
Listen
For
Zone/Group
Selection
Listen
For
Choose Option
Listen
For
Default
Zone Map
To Select
To Verify
60
61
Double
Beep
Enter
physical
zone/group
number.
Double
Beep
Enter alias
zone/group
number.
Triple
Beeps
None
Type of Zone
To Select
To Verify
62
63
Double
Beep
Enter
zone/group
number.
Double
Beep
0 - Output
1 - Input 1
2 - Input 2
Triple
Beeps
Output
Zone To Select
64 Double Enter group
Double Enter zone
Triple
None
Grouping
To Verify
65 Beep
number. Beep
numbers. A #
Beeps
will terminate
the string.
Computer To Select
66
Double
Enter zone or
Double 0 – OFF
Triple
OFF
Monitor To Verify 67
Beep group number
Beep 1 – ON
Beeps
NOTES:
When a Zone Map number (ALIAS) is changed, all of the previous options for that zone will be transferred to the
new zone number
Program the PagePac Plus using ALlAS numbers, if optioned. Otherwise, use Physical zone/group numbers
Exit the programming mode by dialing #
The # key will terminate a digit string (i.e. Zone Numbers string)
2-38 Programming The Controller