Installation guide

Connecting Additional PagePac Plus Controllers or Remote
Amplifiers
When additional PagePac Plus Controller(s) or other ancillary devices are
daisy-chained with the first PagePac Plus Controller, you will want to
ensure that the programming option DTMF Enabled to the Output has
been selected for a YES condition for output zones. This permits you,
when engaged in paging by telephone in one zone, to dial another zone
number (residing on the remote PagePac Plus unit) and automatically
reach that zone. Your DTMF dial input tones are passed through the first
(main) PagePac Plus Controller, to the second one, where a switch of
zones occurs in response to the dialed tones.
See table 2-20 in section 2, for programming steps to enable DTMF
pass-through.
Figure A-7 illustrates a PagePac Plus system with an additional controller
unit and remote amplifier.
Application Notes
A-13