Specifications

Connection Blocks
The PARTNER PagePac module provides an 8-pin (four pair) RJ-45 jack
for both zone 1 and zone 2. To connect the various audio pair wires,
contact closure pair wires, and door bell and door ajar pair wires to the
PARTNER PagePac module’s RJ-45 jack, it is recommended you use a
standard full-modular 8-pin cable to connect from the PARTNER PagePac
module to an AT&T 103A block (see Figure 4-2). The 103A block can in
turn be connected (via 22-24 AWG wire) to an AT&T 66-type block (see
Figure 4-2 for an example Doorspeaker installation).
ZONE 1 AND 2
RJ-45
103A
DOOR WIRE
RJ-45 WIRE
TERMINAL TERMINAL
PAIRS
➡ COLOR
NUMBER
OUT
DOOR BELL
+
➡
BROWN 8
8
PAIR
–
➡ SLATE
1
3
DOOR AJAR*
+ ➡
BLUE
7
7
PAIR
–
➡ ORANGE
2
4
AUDIO PAIR
+
➡
RED
4
2
ZONE 1 (OR 2)
SPEAKERS
–
➡ GREEN
5
1
CONTACT
CLOSURE
+
➡ BLACK
3 5
PAIR DOOR
UNLOCK (TO
–
➡ YELLOW 6
STRIKEPLATE)
6
*NOTE: IF DOOR AJAR IS NOT
OPTIONED, YOU MUST JUMPER
OUTPUT LEADS 4 AND 7. IF A
MODU
CONN
STIKEPLATE DEVICE IS NOT USED
TO
DOORSPEAKER
AND DOOR DEVICES
103A BLOCK OUT
AT&T 103A BLOCK
(OR EQUIVALENT
LAR RJ-45
AT&T COMCODE #)
ECTOR
LEAVE THESE CONTACTS OPEN
8-WIRE
RJ CABLE
RJ-45 MODULAR CABLE FROM
PARTNER PAGEPAC ZONE 1
NOTE: EACH ZONE REQUIRES
OR ZONE 2 PORT
ITS OWN CONNECTING BLOCK
Figure 4-2 AT&T 103A Connection Block Used For Doorspeaker Installation
Doorspeaker Mode Installation 4-3