Installation guide

Synapse Installation Guide Back to Contents
Installation 11
System Installation Overview with Optional Analog Terminal Adapter
If you have analog devices that you want to attach to the system, you will need an AT&T
SB67050 Analog Terminal Adapter (ATA). The Synapse system supports up to four ATAs.
The ATA allows you to connect hardware such as conference phones, overhead paging
equipment, one fax machine per system, and one source for Music on Hold (MoH) per
system as shown in Figure 2.
Install the ATA after you have installed at least one Gateway and the Desksets.
Figure 2. Example of a System Featuring an ATA
ATA
PSTN Plug
Gateway
Local Area Network (LAN)
Deskset
Overhead
Paging
System
Music on Hold
Source
Analog Telephone/
Conference Phone/
Door Phone
Fax Machine