Installation guide

Synapse Installation Guide Back to Contents
Installation 14
See “System Configuration” on page 75 and the Synapse Administrator’s Guide
at
www.telephones.att.com/synapseguides.
10. Install and configure any SB67080 Expansion Modules.
See the SB67080 Expansion Module Installation and Configuration Guide at
www.telephones.att.com/synapseguides.
11. Complete post-installation tasks.
 If you have set the system to use Call Appearance mode, ask all users to record
their user names on their Desksets.
See “Name Recording for the Auto Attendant Directory” in the Synapse
Administrator’s Guide at
www.telephones.att.com/synapseguides.
 If you have set the system to use Call Appearance mode, distribute and register
any Cordless Handsets or Headsets. Synapse Cordless Handsets are not
compatible with Line Appearance mode. See “SB67040 Cordless Handset
Installation” on page 48 and “TL7600 Cordless Headset Installation” on page 51.
 Check for software upgrades and register your Synapse system products. See
“Updating Devices” on page 90 and “Product Registration” on page 94.