Installation guide

Synapse Installation Guide Back to Contents
Installation 24
Figure 6. Single-Zone Overhead Paging on FXS Port
Multi-Zone Paging
Broadcasts to speakers grouped into separate zones. Since the multi-zone OHP systems
require zone selection, they cannot be combined into one zone together with Synapse
Desksets.
Multi-Zone OHP equipment connected to one of the FXS ports:
When paging is configured as a multi-zone OHP, a dedicated Overhead Paging zone
automatically appears as the last entry in the Deskset paging menu.
Figure 7. Multiple-Zone Overhead Paging on FXS Port
Overhead paging cannot be added to Synapse-specific paging zones because
the multi-zone OHP cannot be paged together with Desksets.
The OHP system may have settings that need to be adjusted to work with
Synapse. Refer to your OHP system’s product documentation for installation and
configuration instructions.
Desksets and single-zone OHPs can be included in the same zone. In the case of
a single-zone OHP connected to the FXS port, this Paging System and the
Desksets generate different paging tones. Note that users hear both tones at the
same time if the paging delay is set properly in the WebUI settings.