Installation guide

Synapse Installation Guide Back to Contents

Installation 36

Deskset Installation

Figure 19 identifies the features on the bottom and side of the Deskset. You can install

the Deskset on a desktop or mount it on a wall. Figure 19 represents the SB67030/031

Deskset. Although the SB67020/025 Deskset is slightly different, its features have the

same basic layout.

Figure 19. Deskset Connections

The SB67031 Deskset is compatible only with Synapse systems with software

version 1.9.5 and later. Ensure you have upgraded your system to software

version 1.9.5 or later before installing an SB67031 Deskset.

1. Network Port The two LEDs next to each network port indicate network

status and AC power status.

 The green LED is on when the Deskset is connected to

the network and has AC power.

 The yellow LED flashes when there is network activity.

2. PC Port

3. Reset Button Restarts the Deskset when pressed momentarily.

Restores factory defaults when pressed and held for more

than five seconds with the LAN cable not connected.

4. Power Jack SB67020/025 and SB67031 Desksets also support Power

over Ethernet.

1 2